Monthly Archives: October 2013

Hougen®-Ogura™ Punch-Pro Hole Punchers

Once again, Hougen has more magnificent products to offer!

You’ll punch more holes, more often in more places all in less time using a Hougen-Ogura Punch-Pro Electro-hydraulic Hole Puncher because of its lightweight and single body construction. Unlike hole punchers with separate hydraulics that require hydraulic hoses, the Punch-Pro series has unique single-body construction meaning there is only a 120V power cord to deal with.

Punch-Pro models require less punching tonnage than traditional hole punchers because of an exclusive punch and die design. Siz Punch-Pro models offer punching diameters from 1/4″ up to 15/16″ thru material thicknesses from 5/64″ up to 1/2″. Punching beats drilling.

A Punch-Pro dramatically reduces your hole-making costs over conventional drilling methods.

Time Savings

Punch-Pro users have documented increases in productivity over other holemaking methods. One user stated that he had achieved a 75% time savings over the old method of using twist drills.

Fast Cycle Times

Punch clean and accurate holes in as little as 1.2 seconds. A single trigger actuates the punch while an exclusive auto-return mechanism returns to the punch starting position.

Ease Of Handling

Single body lightweight construction starting at 16.5 lbs make these units easy to handle and move with only a single 120V power cord and no separate hydraulics. And operator fatigue is reduced since the Punch-Pro does all the work.

Accuracy

Eliminates the need to pre-drill or pre-punch. To confirm the punch position, simply jog the punch down to the center mark for the hole location. A convenient release valve allows ease of repositioning if required.

Take Your Choice of Six Hole Punchers

*Note: You can click on the pictures to see larger more detailed pictures. Also, click on the model number above the picture to go for more details or to purchase.

Model #76000

Hougen #76000 Hole Puncher

Be completely cordless and in control with this 18V Cordless Hole Puncher. Weighing in at only 16.5 lbs and providing 8.5 tons of pressure.

FEATURES & SPECIFICATIONS:
– Jog down punch for easy hole alignment, punching speed: 4 sec
– 18V Lithium-ion Battery for long life and 22 m inute charging time.
– Comes with carrying case, 7/16″ punch and die, charger (120V)
– Pressure (Tons): 8.5
– Approximate Punching Speed: 4 seconds
– Maximum Punch Throat Depth: 1.02″ (26mm)
– Single Phase Motor: 18V Cordless (120V Charger)
– Maximum Hole Size: Round – 19/32″ (15mm) Oblong – 7/16″ x 5/8″ (11mm x 16.5mm)
– Maximum Hole Thickness: Round – 1/4″ (6.4mm) Oblong – 1/4″ (6.4MM)
– Steel Sizes: Flat Bar – Channel – Angle
– Small and Compact – 14-1/2″L x 4-13/16″W x 10-19/32″H
– Handle Swivels 360

Model #75002.5A

Hougen #75002.5A hole puncherDesigned for applications typically done with hand held twist drills. At just 26 lbs, our lightest weight model is easily handled in all types of punching applications, onsite or in the shop. Punch round, oblong and square holes in materials from 5/64″ up to 1/4″ thick. Its 2-3/8″ throat depth provides excellent reach and versatility. Easily confirm the hole position with the jog down feature. Punch automatically returns to the starting position after the punching cycle is complete.


FEATURES & SPECIFICATIONS:

– Comes with carrying case, tool kit, work stand, foot switch, 9/16″ punch & (2) dies.
– Pressure (Tons): 13.2
– Approximate Punching Speed: 1.2 seconds
– Maximum Punch Throat Depth: 2-3/8″ (60.3mm)
– Single Phase Motor: 120V/50-60 Hz AC 9.5 Amp / 1050 Watts
– Maximum Hole Size: Round – 25/32″ (20mm) Oblong – 9/16″ x 13/16″ (14mm x 21mm) Square 7/16″ (11mm)
– Maximum Hole Thickness: Round – 19/64″ (7.5mm) Oblong – 1/4″ (6.4mm) Square – 1/4″ (6.4mm)
– Steel Sizes: Flat Bar – Channel – Angle – H-Steel
– 120V power cord and no separate hydraulics.
– 2-3/8″ throat depth with adjustable guide.

 Model #75003A

Hougen #75003A Hole PuncherProvides extra versatility with a unique throat design and the ability to adapt to two punch and die styles. The standard punch/long die combination allows flanged sections to be “swallowed” while the long punch/standard die combination allows the tooling to reach through narrow lip channel to punch the web section. It has the jog down and automatic punch return features like all models.

FEATURES & SPECIFICATIONS:
– Comes with carrying case, tool kit, work stand, foot switch, 9/16″ punch & (2) dies.
– Pressure (Tons): 14.85
– Approximate Punching Speed: 1.5 seconds
– Maximum Punch Throat Depth: 2-5/32″ (54.8mm)
– Single Phase Motor: 120V/50-60 Hz AC 9.5 Amp / 1050 Watts
– Maximum Hole Size: Round – 25/32″ (20mm) Oblong – 9/16″ x 13/16″ (14mm x 21mm)
– Maximum Hole Thickness: Round – 19/64″ (7.5mm) Oblong – 1/4″ (6.4mm)
– Steel Sizes: Flat Bar – Channel – Angle – H-Steel – Lip Channel
– 120V power cord.
– 2-5/32″ throat depth with adjustable guide.

 Model #75004R

Hougen 75004R Punch Pro Hole PuncherPortable electro-hydraulic punch with 22 tons of punching pressure can quickly punch through 3/8″ materials in 2 seconds. Easily confirm the hole position with the jog down feature. Punch automatically returns to the starting position after the punching cycle is complete. If punch ever resists returning to the home position, squeeze the trigger for power feed return. The 75004R is a self contained unit that only requires 120V power. There is no separate hydraulics or power packs required.

FEATURES & SPECIFICATIONS:
– Comes with carrying case, tool kit, work stand, foot switch, 11/16″ punch & dies.
– Pressure (Tons): 22
– Approximate Punching Speed: 2 seconds
– Maximum Punch Throat Depth: 1-9/16″ (39.7mm)
– Single Phase Motor: 120V/50-60 Hz AC 9.5 Amp / 1050 Watts
– Maximum Hole Size: Round – 13/16″ (20.6mm) Oblong – 9/16″ x 13/16″ (14mm x 21mm)
– Maximum Hole Thickness: Round – 3/8″ (9.5mm) Oblong – 3/8″ (9.5mm)
– Steel Sizes: Flat Bar – Channel – Angle – H-Steel
– 120V power cord and no separate hydraulics.
– 1-9/16″ throat depth with adjustable guide.

 Model #75005

Hougen #75005 Pro Punch Hole PuncherThis heavy-duty model is built for punching up to 7/8″ diameter holes in materials up to 3/8″ thick. The addition of eyebolts on both sides of the unit allows for easy attachment of a lift assist or a counter-balancer for improved ergonomics. Its 3-15/16″ throat depth adds to its versatility covering a wide range of work pieces. Easily confirm the hole position with the jog down feature. Punch automatically returns to the starting position after the punching cycle is complete.

FEATURES & SPECIFICATIONS:
– Comes with carrying case, tool kit, work stand, foot switch, 13/16″ punch & (2) dies.
– Pressure (Tons): 27.5
– Approximate Punching Speed: 3 seconds
– Maximum Punch Throat Depth: 3-15/16″ (100mm)
– Single Phase Motor: 120V/50-60 Hz AC 12.2 Amps
– Maximum Hole Size: Round – 7/8″ (22.2mm) Oblong – 11/16″ x 13/16″ (18mm x 21mm)
– Maximum Hole Thickness: Round – 3/8″ (9.5mm) Oblong – 3/8″ (9.5mm)
– Steel Sizes: Flat Bar – Channel – Angle – H-Steel
– 120V power cord.
– 3-15/16″ throat depth with adjustable guide.

And Last But Not Least, Model #75006

Hougen #75006 Punch Pro Hole PuncherOur heaviest duty model, the 75006, develops 34.1 tons pressure and will produce round holes up to a maximum of 15/16″ diameter and punch through a maximum thickness of 1/2″ material in approximately 4 seconds. It has eye bolts on both sides for easy attachment of a lift assist or a counter-balancer for improved ergonomics. Like all Punch-Pro models, its single body design makes it easy to use anywhere. Easily confirm the hole position with the jog down feature. Punch automatically returns to the starting position after the punching cycle is complete.

FEATURES & SPECIFICATIONS:
– Comes with carrying case, tool kit, work stand, foot switch, 13/16″ punch & (2) dies.
– Pressure (Tons): 34.1
– Approximate Punching Speed: 4 seconds
– Maximum Punch Throat Depth: 1-31/32″ (50mm)
– Single Phase Motor: 120V/50-60 Hz AC 12.2 Amps
– Maximum Hole Size: Round – 15/16″ (23.8mm) Oblong – 11/16″ x 13/16″ (18mm x 21mm)
– Maximum Hole Thickness: Round – 1/2″ (12.7mm) Oblong – 1/2″ (12.7mm)
– Steel Sizes: Flat Bar – Channel – Angle – H-Steel
– 120V power cord.
– 1-31/32″ throat depth with adjustable guide.

Feedback:

We’d like to here from you if you have any opinion on these or if you have used them before! Let us know what you like and don’t like! Also, if you need any more information or have any questions, please contact us! Shop with us at Huron Industrial Supply and get our great prices with Hougen’s amazing quality!

Hougen® High Speed Steel & Carbide Holcutters™ for Sheet Metal & Thin Materials

Hougen® Has Done It Again With Their Amazing Products!

14000 series hougen holcutter in actionTheir Carbide and HSS Holcutters™ are superior! The HSS Holcutters™ last 10x longer and cut 3x faster than bi-metal! The Carbide Holcutters cut smooth, fast, burr-free holes, and dramatically outlasts bi-metal hole saws and step drills.

 

High Speed Steel Holcutters™hougen high speed steel holcutter

HSS Holcutters™ last 10x longer and cut 3x faster than bi-metal hole saws or twist drills. All cutters use a single arbor, with a patented Quad-Lead thread mounting system. Can cut materials up to 1/8″ (3.2mm) thick. And as always, these great cutters are Made In USA!

Carbide Holcutters™

Hougen Carbide HolcutterCarbide Holcutters™ cut smooth, fast, burr-free holes in all types of materials, from soft aluminum to tough-to-cut stainless and cast iron. Rugged construction for day in and day out use. Features a shoulder stop to prevent over penetration of the work piece. Ejector Spring helps with slug ejection. Tungsten carbide provides long tool life and smooth cutting action. Dramatically outlasts bi-metal hole saws and step drills. For materials up to 1/8″ (3.2mm) thick. (All cutters include arbor, pilot and spring.) These amazing cutters are of course Made In USA and are the “Contractor’s Choice”!

Interested?

Check out our selection of Hougen® Holcutters™ and get yours today! Our prices are low and Hougen® quality is high! Contact us for any questions you may have!
http://www.huronindustrial.com/in-store/hougen/holcutter-sheet-metal-cutters

Used These Cutters Before?

Comment below and let us know what you think about these Hougen Holcutters, good or bad we want to hear from you!

HOUGEN HMD904 115V Portable Magnetic Drill W/Coolant Bottle & Swivel Base

The drill of choice for fabrication. Lightweight, compact, powerful, & versatile.

HMD904 In Action

FEATURES:
– Large 1-1/2″ x 2″ Capacity.
– Positive slug ejection.
– More durable and powerful magnet.
– Many accessories are available for a portable machine shop including: drill chucks, tapping, countersink, and more…
– Feed handles quickly change from side to side.
– Lift detector safety system.
– Gravity fed coolant system.
– Carrying case included.
– One year manufacturers warranty.

 

SWIVEL BASE FEATURES:
– Precisely line up your pilot with the holes center location.
– One stroke lock and unlock handle.
– Great for horizontal, overhead, tight areas, and getting out over another piece of steel.

Note: This item includes the HMD904 Drill, Swivel Base and Collant Bottle. It does not include the cutter kit.

Made in USA

SPECIFICATIONS:
– Electrical System: 115V, 50/60 Hz – 9A, 1035W
– Motor: 8A (115V) 450 RPM
– Diameter: 7/16″ – 1-1/2″ (12mm – 38mm)
– Depth: 2″ (50mm)
– Cutter/Mount: Rotabroach, Copperhead and Fusion cutters, 3/4″ (19mm) shank.
– Twist Drill Capacity: 1/2″ w/drill chuck.
– Tapping Capacity: 1/2″ w/tapping unit.
– Dimensions: 16-38″ H x 7-3/16″ W x 8-1/4″ L (416mm H x 183mm W x 210mm L)
– Magnet Base: 3-1/8″ W x 6-9/16″ L (28.5mm W x 34.9mm L)
– Swivel Magnet 1″ Plate (25mm):
Dead Lift: 1340 lb. (608 kg)
Drillpoint Breakaway:
Forward – 695 lb. (315 kg)
Back – 835 lb. (379 kg)
– Swivel Magnet 3/8″ Plate (9.5mm):
Dead Lift: 1015 lb. (460 kg)
Drillpoint Breakaway:
Forward – 503 lb. (228 kg)
Back – 605 lb. (274 kg)
– Item Weight: 30.5lb (13.8 kg)

To order yours or for more information, check out our site at http://www.huronindustrial.com/HOUGEN-HMD904-115V-Portable-Magnetic-Drill-w-Coolant-Bottle-Swivel-Base or contact us at 1-800-800-4967 today!

HougenLogo

Hougen® Copperhead™ Carbide Tipped Cutters for Tougher Holecutting

What’s so special about these Copperhead™ Carbide Tipped Cutters?

Copperhead Carbide tipped cutters are premium tools with unique Hougen features.

Hougen Copperhead Carbide Tipped Cutter

Hougen Standard two flat shank Copperhead Carbide Tipped Cutter

Designed for harder, rough, rusted, or more abrasive materials, but offer excellent performance in mild and structural steel applications.

 

 

 

 

Hougen Copperhead Fusion Style Shank Carbide Tipped Cutter

Hougen Copperhead Fusion Style Shank Carbide Tipped Cutter

These cutters feature a full length flute to pull chips out when deep in the hole. A thinner cutter wall improves cutting speed, while special Hougen tooth geometry optimizes cutter life and hole finish. Plus the now are available with two different shanks: the standard two flat 3/4″ shank and the Fusion style shank that fits Hougen mag drills and competitive tool-less arbors.

Interested?

Check out our selection here: https://www.huronindustrial.com/in-store/hougen/copperhead-carbide-cutters or call us for any questions or to order!